The American type hose clamp is one of the stainless steel hose clamps. The product adopts the steel belt through hole process to make the screw tightly bite the steel belt. The screw adopts the corresponding fastening method of the outer hexagonal head and the cross or flat screwdriver in the middle, making it convenient to operate Advantages, to enhance the efficiency of product use, the product is used in the oil, water, and gas circuits of automobiles, motorcycles, tractors, and mechanical vehicles to make the pipe joints more tightly sealed!

Product introduction: The occlusal groove on the steel belt of the American hose clamp is penetrated and formed by hollow punching. There are two types of grooves: rectangular hole and willow hole. The worm gear screw on the hose clamp has the screw thread embedded in the groove. The screw is commonly used to tighten the diameter of the hose clamp steel band, so that it has a locking effect.

Classification: In American style hose clamps, it is divided into small American style, Chinese American style and big American style. It is determined by the width of the steel strip. Small American style is 8MM wide, Central American style is 10MM wide, and Big American style is 12.7MM wide.

Material: American type hose clamps commonly used materials are: stainless steel (201/304/316), and the surface of carbon steel is plated with white zinc.

Features: Since the occlusal groove of the steel belt of the American hose clamp is penetrated, and the teeth of the screw are embedded, it is more powerful when tightening. Accurate bite. However, because the steel belt is self-permeable, it is easy to break when the tension is strong. This kind of tensile performance is relatively stronger than that of German type hose clamps.

The hose clamp is widely used in the hose connection of automobile pipelines, water pumps, fans, food machinery, chemical machinery and other industries. Beautiful and generous.