Description

The German type hose clamp with non-perforated design helps to avoid scratching the hose surface during installation. Thence, the effect of protecting to avoid gas or liquid leaking from the tube.
Stainless Steel Hose Clamps are designed to attach and seal a hose onto a fitting, inlet/outlet, and more when harsh environmental conditions may adversely affect the clamping application and used where corrosion, vibration, weathering, radiation, and temperature extremes are a concern,stainless steel hose clamps can be used in virtually any indoor and outdoor application.

Features

The width of German type hose clamp is 9mm or 12mm

Higher torque than American type hose clamp.

The band has Germany type wolf teeth designed for reduce clamping chafing and damage

All Stainless steel perfect for applications requiring greater resistance to corrosion

Great for used in a leaking environment with intense vibration and under high pressure, like emission control, fuel lines and vacuum hoses, industry machinery, engine, tube (hose fitting ) for ship, etc.

Material

W1 (Mild Steel Zinc Protected/Zinc Plated) All parts of the clip are mild steel zinc protected/plated which is the most common material for hose clips. Mild steel (also known as carbon steel) has a low to moderate natural resistance to corrosion which is overcome by coating with zinc. Corrosion resistance even with zinc coating is lower than 304 & 316 grades of stainless steel.

W2 (Mild Steel zinc Protected for screw . the band and housing are stainless steel , it can be SS201 , SS304)

W4 (304 Grade Stainless Steel / A2 / 18/8) All component parts of the hose clip are 304 grade. The clips have a higher corrosion resistance, making them suitable for outdoor applications as well as having good general corrosion resistance to slightly acidic as well as caustic media. 304 grade stainless steel is also known as 18/8 stainless due to its chemical composition which includes approximately 18% chromium and 8% nickel by weight. This material is magnetic.

W5 (316 Grade Stainless Steel / A4) All parts of the hose clips are 316 “marine grade” stainless steel, offering an even higher corrosion resistance than 304 grade in most acidic conditions, especially at higher temperatures and or with chlorides present. Suitable for marine, offshore and food industries. 316 grade stainless steel is known as 18/10 stainless or High Nickel Stainless Steel (HNSS) due to the increased percentage of 10% nickel in the alloy’s chemical composition. Non-magnetic.